My Guestbook
There are currently 11 messages.
There have been 18604 visits since 2006-03-16
This page was last accessed on 2010-09-03
Message Number: 11 -
Tuesday, February 2, 2010 03:13:39 PDT
[IP = 153.2.246.33] -United States 
Comments:
Brian , would just like to say thank you for the guidescope plate you recently manufactured for me, the plate is solidly made and fits perfectly to my newtonian.
Appreciate all your help and advice !
Regards
Mark
Message Number: 10 -
Thursday, April 5, 2007 10:15:15 PDT
[IP = 90.242.6.88] -United Kingdom 
Comments:
I wanted to learn how to take guided images & did
not want to piggyback my guide scope. I decided I would
prefer a plate, so the scopes could sit side by side. I
felt it would spread the load better.
I saw Brian of ASTROPARTS at Astrofest, in London, this
year, & saw that he had what I wanted on his stand.
Nicely made plates, & a very helpful man.
He sent me the plate, which was very well made. I
decided to have it made shorter, as I think, I may
have been misleading with my measurements & also I
decided to buy a smaller guidescope than my 6"
Maksutov.
Brian did not hesitate to take it back for alteration,
at no extra cost to myself.
He is very honest, helpful & genuine & I
will recommend him to other astronomers in the future.
Kind regards,
Fay
Message Number: 9 -
Sunday, December 17, 2006 02:15:13 PDT
[IP = 88.109.156.133] -United Kingdom
Comments:
Brian...mate....you are doing a good service to amateur
astronomy.
Message Number: 8 -
Monday, December 11, 2006 07:12:51 PDT
[IP = 67.100.183.44] -United States
Comments:
Great site! Keep up the good work.
Message Number: 7 -
Friday, November 10, 2006 12:17:19 PDT
[IP = 62.253.32.7] -United Kingdom
Comments:
Brian has modified an LX50 mount to make a very sturdy
AWR guided alt-az which carries a 250mm flat mirror that
feeds a 100mm horizontal solar telescope.
Originally the flat was driven by an old half speed
equatorial head but this vibrated in the smallest breeze
and needed continual Dec adjustment if it wasn't an
equinox. The new mounting is solid and already allows
improved definition due to higher stiffness.
Es Reid
| Message Number: 6 - Sunday, July 30, 2006 15:19:10 PDT | |
| Private Message - See control panel |
Message Number: 5 -
Friday, July 28, 2006 11:42:59 PDT
[IP = 82.153.222.185] -United Kingdom
Comments:
I would just like to say thank you to Brain for all his
help and hard work.
Brain made a new pier for my 10
inch Newtonian Reflector.
He also made a portable
pier.
Another project was a focuser with a 3:1 fine
tuner. This was adpated from a Crayford Focuser.
/>
Message Number: 4 -
Thursday, July 13, 2006 18:29:01 PDT
[IP = 86.133.26.48] -United Kingdom
Comments:
Brian,
The short Mogg adapters are great. They enable me to
image with a webcam or a video camera with my Coronado PST
H-alpha and Ca-K solar scopes
Steve
| Message Number: 3 - Thursday, July 13, 2006 18:06:23 PDT | |
| Private Message - See control panel |
| Message Number: 2 - Sunday, April 9, 2006 09:05:12 PDT | |
| Private Message - See control panel |
|
